Middle European Scientific Bulletin

Volume 30, November 2022, Pages 76-79

Full Lenght Article
Centrifugal Pumps

Under a Creative Commons license
Open Access

Abstract

Improving the efficiency of use due to constructive changes in some parts of pumping units and the selection of optimal operating modes. Determination of the permissible installation geometric height of the pump shaft. Determine the permissible installation geometric height of the pump shaft from the level of water suctioned by the pump.

Abstract

Improving the efficiency of use due to constructive changes in some parts of pumping units and the selection of optimal operating modes. Determination of the permissible installation geometric height of the pump shaft. Determine the permissible installation geometric height of the pump shaft from the level of water suctioned by the pump.

Keywords

Pump
pumping station
volume
resistance coefficient
open flow
velocity
live section
perimeter
channel
water flow
friction

Declarations

Conflict of Interest Statement

The author (s) declare that the research was conducted in the absence of any commercial or financial relationships that could be construed as a potential conflict of interest.

Downloads

Download data is not yet available.

References

1. Xojimatov, A. A. va Oripov, G. (2020). Qishloq xo`jalik mahsulotlarini klaster tizimda ishlab chiqarishda zamonaviy texnika va ularni saqlash usullarini qo`llash. agrooziq -ovqat tizimlarining innovatsion rivojlanishini milliy va mintaqaviy darajalarda boshqarishda (293-297-betlar).
2. Matyakubov, B., Mamajonov, M., Shakirov, B., & Teplova, G. (2020, July). Forebays of the poligonal cross-section of the irrigating pumping station. In IOP Conference Series: Materials Science and Engineering (Vol. 883, No. 1, p. 012050). IOP Publishing.
3. Bakhtiyar, M., Bakhtiyar, S., Adil, A., & Isomiddin, K. (2021). Effective Use of Irrigation Water in Case of Interfarm Canal. Annals of the Romanian Society for Cell Biology, 2972-2980.
4. Matyakubov, B., Koshekov, R., Avlakulov, M., & Shakirov, B. (2021). Improving water resources management in the irrigated zone of the Aral Sea region. In E3S Web of Conferences (Vol. 264, p. 03006). EDP Sciences.
5. Aynakulov, S. A., Karimova, K., Shakirov, B., Alibekov, S., & Mamajonov, M. (2020, July). Constructive device for sediment flushing from water acceptance structure. In IOP Conference Series: Materials Science and Engineering (Vol. 896, No. 1, p. 012049). IOP Publishing.
6. Makhmud, Mamajonov, Shakirov Bakhtiyar Makhmudovich, and Shakirov Bobur Mirzo Bakhtiyar Ogli. "Forecasting factors affecting the water preventionof centrifugal pumps." European science review 5-6 (2018): 304-307.
7. Yusupova Ranakhon Kasimdjanovna. Analysis of IP Sustainability and Efficiency Coefficiency. Middle European Scientific Bulletin. 2022/04/23
8. Khadjiyieva Salima Sadiqovna, Ibragimjanov Bakrambek Hamidovich. Some Recommendations for the Application of Powder Alloys in the Restoration Of Agricultural Machinery Parts by Plasma Surface and Spraying Methods.International journal on orange technology. 2022/06/4.

Bibliographic Information

Verify authenticity via CrossMark

Cite this article as:

Fazliddinovich, P. S. . (2022). Centrifugal Pumps. Middle European Scientific Bulletin, 30, 76-79. Retrieved from https://cejsr.academicjournal.io/index.php/journal/article/view/1587
  • Submitted
    12 November 2022
  • Revised
    12 November 2022
  • Published
    12 November 2022