The Development of Deformation in Concrete and Reinforcement in Concrete Beams Reinforced with Fiberglass Reinforcement

Makhkamov Yuldashali  Mamazhonovich; Umarov Shodiljon  Abdugofurovich; Mirzababayeva Sahiba  Mirzaakbarovna

doi:10.47494/mesb.2021.18.903

(1) Makhkamov Yuldashali Mamazhonovich Candidate of technical sciences, Associate Professor, Department of Construction of Buildings and Structures, Fergana Polytechnic Institute, Fergana, Republic of Uzbekistan
Uzbekistan
(2) Umarov Shodiljon Abdugofurovich PhD, Associate Professor, Department of Construction of Buildings and Structures, Fergana Polytechnic Institute, Fergana, Republic of Uzbekistan
Uzbekistan
(3) Mirzababayeva Sahiba Mirzaakbarovna Lecturer, Department of Construction of Buildings and Structures, Fergana Polytechnic Institute, Fergana, Uzbekistan
Uzbekistan
(*) Corresponding Author

DOI:

https://doi.org/10.47494/mesb.2021.18.903

Keywords:

fiberglass composite reinforcement, heavy concrete, longitudinal reinforcement, clamp, shear force, normal, oblique crack, deflection

Abstract

This article presents experimental data on the development of deformations in longitudinal reinforcement and concrete in the compressed zone of the section of bent concrete beams made of ordinary heavy concrete, equipped with fiberglass composite reinforcement under the action of transverse forces.

Downloads

Download data is not yet available.

References

ShNQ 2.03.14.18 "Concrete structures with composite polymer reinforcement".

Umarov, S. A. (2021). Development of deformations in the reinforcement of beams with composite reinforcement. Asian Journal of Multidimensional Research, 10(9), 511-517.

Makhkamov, Y. M., & Mirzababaeva, S. M. (2021). Rigidity of bent reinforced concrete elements under the action of shear forces and high temperatures. Scientific-technical journal, 4(3), 93-97.

Краснощеков, Ю. В. (2019). Расчетная модель сопротивления поперечной силе железобетонных изгибаемых элементов. Вестник Сибирской государственной автомобильно-дорожной академии, 16(2 (66)).

Гончарова, Н. И., Абобакирова, З. А., & Мухамедзянов, А. Р. (2020). Энергосбережение в технологии ограждающих конструкций. In Энерго-ресурсосберегающие технологии и оборудование в дорожной и строительной отраслях (pp. 107-112).

Abobakirova, Z. A. (2021). Reasonable design of cement compositionfor refactory concrete. Asian Journal of Multidimensional Research, 10(9), 556-563.

Турсунов, С., Рахмонов, Б. К., Мирзабабаева, С. М., & Игнатова, О. А. (2018). Исследование физико-механических свойств термообработанной древесины тополя. Труды Новосибирского государственного архитектурно-строительного университета (Сибстрин), 21(2), 127-139.

Mamazhonovich, M. Y., & Mirzaakbarovna, M. S. (2021). To Calculation Of Bended Elements Working Under The Conditions Of Exposure To High And High Temperatures On The Lateral Force By A New Method. The American Journal of Applied sciences, 3(5), 210-218.

Mahkamov, Y. M., & Mirzababaeva, S. M. (2020). Strength of bending reinforced concrete elements under action of transverse forces under influence of high temperatures. ACADEMICIA: An International Multidisciplinary Research Journal, 10(5), 618-624.

Mamajonov, A. U., Yunusaliev, E. M., & Mirzababaeva, S. M. (2020). Production test for producing porous filler from barkhan sand with additives of hydrocastic clay and oil waste. ACADEMICIA: An International Multidisciplinary Research Journal, 10(5), 629-635.

Asrorovna, A. Z. (2021). Effects Of A Dry Hot Climate And Salt Aggression On The Permeability Of Concrete. The American Journal of Engineering and Technology, 3(06), 6-10.

Abobakirova, Z. A. (2021). Regulation Of The Resistance Of Cement Concrete With Polymer Additive And Activated Liquid Medium. The American Journal of Applied sciences, 3(04), 172-177.

Abdukhalimjohnovna, M. U. (2021). Technology Of Elimination Damage And Deformation In Construction Structures. The American Journal of Applied sciences, 3(5), 224-228.

Abdukhalimjohnovna, M. U. (2020). Failure Mechanism Of Bending Reinforced Concrete Elements Under The Action Of Transverse Forces. The American Journal of Applied sciences, 2(12), 36-43.

Gayradjonovich, G. S., Mirzajonovich, Q. G., Tursunalievich, S. B., & Ogli, X. A. M. (2021). Corrosion State Of Reinforced Concrete Structures. The American Journal of Engineering and Technology, 3(06), 88-91.

Ogli, X. A. M. (2021). Construction Of Flexible Concrete Elements In Buildings. The American Journal of Engineering and Technology, 3(06), 101-105.

Djurayevna, T. N. (2020). Building Materials Determined In The Architectural Monuments Of Central Asia. The American Journal of Applied sciences, 2(12), 77-80.

Ashurov, M., Sadirov, B. T., Xaydarov, A. M., Ganiyev, A. A., Sodikhonov, S. S., & Khaydarova Kh, Q. (2021). Prospects for the use of polymer composite fittings in building structures in the republic of Uzbekistan. The American Journal.

Usmonov, Q. T., & Xaydarov, A. M. (2021). Yirik shaharlarda turar-joy maskanlari uchun xududlarni muhandislik tayyorgarlik va obodonlashtirish ishlarini amalga oshirish yo ‘llari. Scientific progress, 2(6), 1297-1304.

Ogli, X. A. M. Development of effective cement additives for the production of heat-resistant concrete based on technogenic waste" International Journal of Researchculture Society. India (2019. 12. 12).

Egamberdiyev, B. O. (2020). A Practical Method For Calculating Cylindrical Shells. The American Journal of Engineering and Technology, 2(09), 149-158.

Davlyatov, S. M., & Makhsudov, B. A. (2020). Technologies for producing high-strength gypsum from gypsum-containing wastes of sulfur production-flotation tailings. Academicia: An International Multidisciplinary Research Journal, 10(10), 724-728.

Mirzaahmedov, A. T. (2020). Algorithm For Calculation Of Multi Span Uncut Beams Taking Into Account The Nonlinear Work Of Reinforced Concrete. The American Journal of Applied sciences, 2(12), 26-35.

Adilhodzhaev, A., Igamberdiev, B., Kodirova, D., Davlyatov, S., Marufjonov, A., & Shaumarov, S. (2020). The study of the interaction of adhesive with the substrate surface in a new composite material based on modified gypsum and treated rice straw. European Journal of Molecular & Clinical Medicine, 7(2), 683-689.

Akhrarovich, A. K., & Muradovich, D. S. (2016). Calculation of cylindrical shells of tower type, reinforced along the generatrix by circular panels. European science review, (3-4).

Акрамов, Х. А., Давлятов, Ш. М., & Хазраткулов, У. У. (2016). Методы расчета общей устойчивости цилиндрических оболочек, подкрепленных в продольном направлении цилиндрическими панелями. Молодой ученый, (7-2), 29-34.

Usarov, M. K., & Mamatisaev, G. I. (2020, November). Calculation on seismic resistance of box-shaped structures of large-panel buildings. In IOP Conference Series: Materials Science and Engineering (Vol. 971, No. 3, p. 032041). IOP Publishing.

Usarov, M., Ayubov, G., Mamatisaev, G., & Normuminov, B. (2020, July). Building oscillations based on a plate model. In IOP Conference Series: Materials Science and Engineering (Vol. 883, No. 1, p. 012211). IOP Publishing.