LABORATORY TESTS OF SOFT PADS FOR REMOVABLE PROSTHETICS AND ORTHOPEDIC TREATMENT IN THE PRESENCE OF ACUTE BONE PROTECTION
DOI:
https://doi.org/10.47494/mesb.v16i.742Keywords:
liner, clinical dentistry, Acrylic soft pad, silicone materialAbstract
On the basis of the Kazakh National Technical University K.I. Satpayev, physical and mechanical studies of soft pads for removable prosthetics were carried out; hot curing elastic silicone materials - Fuji, Mukopren and GosSil. The results of the study of the conditional elongation strength showed the maximum value for the GosSil material, the Mukopren material had the highest coefficient of elongation, the GosSil material had a high residual elongation, the measurement of the elongation stress revealed the highest elasticity of the Fuji material. Also, in the clinic of dentistry, prosthetics of 35 patients were carried out with full removable dentures with a soft lining from the materials understudy in the presence of a torus and sharp bone protrusions. Observation for 180 days showed that the fabricated removable dentures with a soft lining, taking into account the pain sensitivity of the oral mucosa, provides quick adaptation and good chewing efficiency, improves
gnathodynamometry indicators.
Downloads
References
Alifanov Ye.V., Chaykun A.M., Naumov I.S., Yeliseyev O.A. Elastomernyye materialy povyshennoy teplostoykosti. Trudy VIAM 2017. №2(50)2. -S.41-47.
Voronov I.A., Voronov A.P., Lebedenko I.YU. Ortopedicheskoye lecheniye bol'nykh s polnym otsutstviyem zubov. M.MED press-inform, 2006. -S.320.
Gafforov S.A., Agzamkhuzhayev S.S., Khodzhimetov A.A. Soderzhaniye mikroelementov (Ca, Zn, Fe, Ag) v zubakh, slyune, krovi u rabochikh Ferganskogo khimicheskogo zavoda furanovykh soyedineniy. Rossiyskiy stomatologicheskiy zhurnal. №5. S.28-29. Rossiya-2003.
Gafforov S.A., Saidov A.A. Stomatologicheskiy status i usloviya truda rabochikh krasil'nootbelivayushchey fabriki.
Zhurnal «Vrach-aspirant» №1.2 (50) S.273-278. Rossiya-2012.
Gafforov S.A., Mamedova F.M. Profilaktika stomatologicheskikh zabolevaniy u rabotnikov tekstil'nogo proizvodstva. Sredneaziatskiy nauchno-prakticheskiy zhurnal «Stomatologiya» №3. S.35-38. Tashkent- 2000.
Gafforov S.A., Olimov S.SH., Akhmadalev N.N. Zabolevaniya tvordykh tkaney zubov u rabotnikov muborakskogo gazopereraboyvayushchego zavoda. «Rossiyskiy stomatologicheskiy zhurnal». №6. S.39-40. Rossiya-2008.
Dik, Dkh.S. Tekhnologiya rezin: retsepturostroyeniya i ispytaniya– SPB: Nauchnyye osnovy i tekhnologii. 2010. - S. 602.
Mezhgosudarstvennyy standart. Rezina. Metody opredeleniya plotnosti. Data aktualizatsii.01.01.2021.
Nasuyev G.M. Razrabotka otechestvennogo silikonovogo materiala kholodnoy polimerizatsii dlya myagkikh podkladok zubnykh protezov. Avtoref. k.m.n. Moskva 2013.
Nespryad'ko V.P., Baranovskiy A.P., Kisel' Z.F. Osobennosti ortopedicheskogo lecheniya patsiyentov s polnym otsutstviyem zubov na odnoy iz chelyustey// Sovremennaya stomatologiya. 2014. -№1. -S.81-84.
Primeneniye sovremennykh metodov standartizatsii dlya opredeleniya kachestvo stomatologicheskikh plombirovochnykh materialov i oborudovaniya. Gafforov S.A., i drugiye Metod. rekomendatsii 06.02.08. Tashkent-2008g. 22 str.
Stomatologicheskiy status rabochikh osnovnykh otrasley promyshlennosti Uzbekistana. Gafforov S.A. i drugiye. Monografiya. 208 s. Tashkent -2006.
«Stomatologiya». Pod redaktsii prof. S.A. Gafforova Rukovodstvo dlya stomatologa pedagogov, medikov, magistrov, klinicheskikh ordinatorov, kursantov dlya povysheniya kvalifikatsii spetsialistov. Tashkent -2021. 875 s.
Petrosyan A.F., Lebedenko I.YU. Vybor bazisnogo materiala dlya profilaktiki polomok protezov pri ortopedicheskom lechenii bol'nykh s polnym otsutstviyem zubov na verkhney chelyusti pri razlichnoy konfiguratsii neba. //Yevraziyskiy soyuz uchenykh (YESU) 2019. -№12(69) –S.23-29.
Published
How to Cite
Issue
Section
Copyright (c) 2021 N.S. Ruzuddinov, S.A. Gafforov, S. Ruzuddinov
This work is licensed under a Creative Commons Attribution 4.0 International License.
The work simultaneously licensed under a Creative Commons Attribution 4.0 International License
You are free to:
- Share — copy and redistribute the material in any medium or format
- Adapt — remix, transform, and build upon the material for any purpose, even commercially.
The licensor cannot revoke these freedoms as long as you follow the license terms.
Under the following terms:
-
Attribution — You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
- No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.