The Influence of Thermal Baking Modes on the Electrical Properties of the Carbide Coating and its Strength with the Base

Karimov  Sh. A.; Mirzarakhimova  Z. B.; Khabibullayeva  I. A.; Guzashvili.  K. V.

doi:10.47494/mesb.v21i.1091

The Influence of Thermal Baking Modes on the Electrical Properties of the Carbide Coating and its Strength with the Base

(1) Karimov Sh. A. Materials Science Department, Tashkent State Technical University, Uzbekistan
Uzbekistan
(2) Mirzarakhimova Z. B. Materials Science Department, Tashkent State Technical University, Uzbekistan
Uzbekistan
(3) Khabibullayeva I. A. Materials Science Department, Tashkent State Technical University, Uzbekistan
Uzbekistan
(4) Guzashvili. K. V. Materials Science Department, Tashkent State Technical University, Uzbekistan
Uzbekistan
(*) Corresponding Author

DOI:

https://doi.org/10.47494/mesb.v21i.1091

Keywords:

Friction, wear, surface, wear ability, pressure, heat, diffusion, secondary structures

Abstract

The article discusses the influence of thermal baking modes on the electrical properties of the carbide coating and its strength with the base. It is found that the electrical resistivity of the carbide coating applied by the baking method reflects the structural state of the material and allows optimizing the thermal regime of the process. By the value of the specific electrical resistance of the sintered coating, it is possible to predict the strength of its connection with the substrate.

Downloads

Download data is not yet available.

References

Dorojkin N.N., Abramov T.M., Jorkin V.N. Poluchenie pokrytiy metodom pripekaniya [Obtaining coatings by baking]– Mn.: Nauka i tehnika. 1980. 176 s.

Karimov Sh.A., Timofeev S.M. Tehnologiya formirovaniya tverdosplavnih pokrytiy elektrokontaktnim pripekaniem [Technology of formation of carbide coatings by electrocontact baking] /Sb. «Sovremennye tehnologii v mashinostroenii». – Harkov: Izd-vo NTU HPI, 2007. S.248 -255.

Livshic B.G., Kraposhin V.S., Lineckiy Y.L. Fizicheskie svoystva metallov i splavov [Physical properties of metals and alloys]. – M.: Metallurgiya, 1980. - 368 s.

Lopata L.A. Vliyanie anomalnogo masso perenosa na adgezionnuyu prochnost poroshkovih pokritiy pri elektrokontaktnom pripekaniy [The effect of abnormal mass transfer on the adhesive strength of powder coatings during electrocontact baking]. /Vestnik Cherkazskogo nacionalnogo universiteta. Seriya «Fiziko-matematicheskie nauki», 2007. Vypusk 177. s. 87-94.

Ziyamukhamedova Umida Alijanovna, Bakirov Lutfillo Yuldoshaliyevich, Miradullaeva Gavkhar Bakpulatovna, & Bektemirov Begali Shukhrat Ugli (2018). Some Scientific and technological principles of development of composite polymer materials and coatings of them forcotton machine. European science review, (3-4), 130-135.

Bektemirov B. S., Ulashov J. Z., Akhmedov A. K., & Gopirov M. M. (2021, June). TYPES OF ADVANCED CUTTING TOOL MATERIALS AND THEIR PROPERTIES. In Euro-Asia Conferences (Vol. 5, No. 1, pp. 260-262).

VIEW ARTICLE

Published

2022-02-28

How to Cite

Sh. A., K. ., Z. B., M. ., I. A., K. ., & K. V., G. . (2022). The Influence of Thermal Baking Modes on the Electrical Properties of the Carbide Coating and its Strength with the Base. Middle European Scientific Bulletin, 21, 220-222. https://doi.org/10.47494/mesb.v21i.1091

Download Citation

Issue

Vol. 21 (2022): February

Section

Education

This work is licensed under a Creative Commons Attribution 4.0 International License.

The work simultaneously licensed under a Creative Commons Attribution 4.0 International License

You are free to:

Share — copy and redistribute the material in any medium or format
Adapt — remix, transform, and build upon the material for any purpose, even commercially.

The licensor cannot revoke these freedoms as long as you follow the license terms.

Under the following terms:

Attribution — You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.

No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.