Change of the Mechanical Properties of the Gases Obtained from the Mixture of Fibers with Different Compositions
Keywords:
pilta, base surface of gasses, bulk density, bulk tensile strengthAbstract
in this article, 5000 tex pelts were made on the JFA-226 carding machine at the production enterprise, 3 types of pelts were made on the HSR-1000 type pelting machine in the laboratory of TTESI under the "Spinning Technology" department, JAT of the Japanese company "Toyota" in the laboratory under the "Textile Fabric Technology" department On the 810 loom, yarn made of 100% cotton fibers was thrown into the warp thread, and yarn mixed with secondary fibers was thrown into the loom yar.
Downloads
References
Frolova I.V. I.V. Frolova, V.V. Makarov // Izv. Vuzov. Technol. textile. prom. 1998. - No. 1. - S. 56-58.
Frolov V.D. Технологические условия разволокнения лоскута в зоне питаюшчего устройства Текст./ V.D. Frolov, M.D. Larionova // Izv. Vuzov. Technol. text, prom-sti. 1999. - No. 6. - S. 52-54.
Ivanova N.N., Misko N.N. K voprosu pererabotki otkhodov tekstilnykh materialov sveynogo proizvodstva// Pererabotka otkhodov tekstilnoy i light industry: theory and practice, Materialy dokladov Mejdunarodnoy nauchno-prakticheskoy konferentsii, 2016, Vitebsk, 47 p.
Selezneva I. I. Resursosberezhenie v shveynom proizvodstve / I. I. Selezneva, R. N. Filimonenkova, E. L. Kulazhenko // Materialy dokladov 43 nauchno-teknicheskoy conference of teachers and students of the university / UO "VGTU". -Vitebsk, 2010. -S. 230-231.
Kadnikova O.Yu., Shaldykova B.A. Upravlenie protsessom pererabotki otkhodov kak faktor ekologo-ekonomicheskogo razvitiya predpriyatiy sveino-trikotajnoy promyshlennosti //Mejdunarodnyi dvuyazychnyi nauchnyi journal "Nauka i Mir" No. 3 (31).-Volgograd, 2016. - S. 54 - 56.
Gerasimuk I.N., Zimina E.L., Kogan A.G. Ratsionalnogo ispolzovaniya otkhodov na shveynoy predpriyatiyax. Pererabotka otkhodov textile and light industry: theory and practice. Materialy dokladov Mejdunarodnoy nauchno-prakticheskoy conference. 2016, Vitebsk, 40 S.
Bashkov, A.P. Razrabotka resursosberegayushchih tekhnologii dlya proizvodstva netkanyx materialov teknicheskogo naznacheniya: monografiya / A.P. Bashkov, V.D. Frolov.-Ivanovo: IGTA.-2007.-288 p.
Kulmetov Mirpolat, Atanafasov Mukhiddin Rakhmonovich, Laysheva Elmira Talgatovna, Yuldasheva Mavluda Turamuratovna, Akhmedova Mokhinur Fayzullo qizi, “Effect of Rate Quantity on IP Quality” International Journal of Innovative Research in Science, Engineering and Technology (IJIRSET), e-ISSN: 2319-8753, p-ISSN: 2347-6710, Volume 10, Issue 11, November 2021.
Atanafasov Mukhiddin Rakhmonovich, Ochilov Tulkin Ashurovich, Valieva Zulfiya Fakhritdinovna, Vliyanie kolichestvennogo soderjaniya otkhodov na kachestvennye kharacteristiki pryaji. Scientific magazine Izdaetsya ejemesyachno s December 2013 goda Yavlyaetsya pechatnoy versiey setevogo jurnala Universum: teknicheskie nauki, Vypusk: 2(95) February 2022 Chast 4.
Muxtarov Jo’rabek Reyimberganovich, Djumaniyozov Muxammadjon Baxromovich, Atanafasov Mukhiddin Rakhmonovich, Akhmedova Mokhinur Fayzullo qizi, “Virginity of Rops from Returnschange of Indicators”, International Journal of Innovative Research in Science, Engineering and Technology (IJIRSET), p-ISSN: 2347-6710, Volume 10, Issue 11, November 2021.
Atanafasov Mukhiddin Rakhmonovich, Ochilov Tulkin Ashurovich, Usmonova Shaxnoza Anvarovna, Yuldashyev Jaxongir Norquvvato’g’li, Hakimov Shahzod Husniddin o’g’li, Influence of Cotton Fiber of Different Composition and Secondary Material Resources on Single-Cycle Elongation Deformation of Yarns, International Journal of Innovative Research in Science, Engineering and Technology (IJIRSET) p-ISSN: 2347-6710, Volume 11, Issue 2, February 2022.
Published
How to Cite
Issue
Section
This work is licensed under a Creative Commons Attribution 4.0 International License.
The work simultaneously licensed under a Creative Commons Attribution 4.0 International License
You are free to:
- Share — copy and redistribute the material in any medium or format
- Adapt — remix, transform, and build upon the material for any purpose, even commercially.
The licensor cannot revoke these freedoms as long as you follow the license terms.
Under the following terms:
-
Attribution — You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
- No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.
