The Process of Obtaining Nickel from the Composition of Nickel Waste Research Technological Parameters
DOI:
https://doi.org/10.47494/mesb.v23i.1176Keywords:
Nickel, Parameters, Waste ResearchAbstract
Expansion of the production of high-quality metal alloys will lead to the consumption of large amounts of rare and expensive alloying elements in the metal trade. This leads to the development of new technologies that save efficient resources. Nickel is imported for the production of steel and chromium cast iron alloys containing 2% high-quality nickel. However, in the petrochemical and chemical industries of the Republic, more than 1,000 tons of catalyst waste and precious metals (Ni, Mo, Cu, Cr, Zn and others) containing 5% to 50% are wasted annually. The recycling of waste alloys and the use of used catalysts will save the currency spent on precious metals in the manufacturing industry, as well as reduce the harmful effects of waste on the environment.
Downloads
References
Экономное легирование железоуглеродистых сплавов. С.Н.Леках, М.Н.Мартынюк, А.Г.Слуцкий и др.; Под общ. ред. С.Н.Лекаха. Мн.: Наука и техника, 1996.
Костяков В.Н., Найдек А.Л., Полетаев Е.Б. и др. Особенности технологии выплавки сплавов из отработанных никельсодержащих катализаторов. Металлургиямашиностроения. 2002. №5. С. 3—4.
Ilkhomovich, F. B., Khujakhmatovich, T. S., &Sabirovich, I. F. Development of Production of Natural Gas Primary Reforming Catalyst. International Journal on Integrated Education, 3(9), 264-266.
Фарманов, Б. И., Тавашов, Ш. Х., &Дадаходжаев, А. Т. (2020). ИЗУЧЕНО ВЛИЯНИЕ КОЛИЧЕСТВА Сa-СОДЕРЖАЩЕГО КОМПОНЕНТА И РЕЖИМОВ ТЕРМООБРАБОТКИ КОРУНДОВОГО НОСИТЕЛЯ КАТАЛИЗАТОРА. In ТЕХНИЧЕСКАЯ И ТЕХНОЛОГИЧЕСКАЯ МОДЕРНИЗАЦИЯ РОССИИ: ПРОБЛЕМЫ, ПРИОРИТЕТЫ, ПЕРСПЕКТИВЫ (pp. 29-31).
Фарманов, Б. И., &Тавашов, Ш. Х. (2021). РАЗРАБОТКА ТЕХНОЛОГИИ ПОЛУЧЕНИЯ ПРОЧНЫХ НОСИТЕЛЕЙ И НИКЕЛЕВЫХ КАТАЛИЗАТОРОВ ДЛЯ ПЕРВИЧНОГО РИФОРМИНГА ПРИРОДНОГО ГАЗА. Universum: технические науки, (5-5), 17-20.
Фарманов, Б. И., Дадаходжаев, А. Т., Мирзакулов, Х. Ч., &Мингбаева, Д. М. (2020). ТЕХНОЛОГИЯ КАТАЛИЗАТОРОВ ПЕРВИЧНОГО РЕФОРМИНГА ПРИРОДНОГО ГАЗА. In Химическая технология и техника (pp. 81-82).
Ilkhomovich, F. B., &Tursunovich, D. A. (2020). Development of a technology for the production of aluminum-nickel calcium catalyst for steam conversion of natural gas. Asian Journal of Multidimensional Research (AJMR), 9(2), 252-260.
Фарманов, Б. И., Рузиева, З. Т., &Фарманова, Д. И. (2020). Определение оптимальных параметров поглощения диоксида углерода аммиачным раствором нитрата аммония. Universum: технические науки, (2-2 (71)).
Published
How to Cite
Issue
Section
This work is licensed under a Creative Commons Attribution 4.0 International License.
The work simultaneously licensed under a Creative Commons Attribution 4.0 International License
You are free to:
- Share — copy and redistribute the material in any medium or format
- Adapt — remix, transform, and build upon the material for any purpose, even commercially.
The licensor cannot revoke these freedoms as long as you follow the license terms.
Under the following terms:
-
Attribution — You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
- No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.
